ISO 18758:2026

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٤ نوفمبر ٢٠٢٦

Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements

ملفات الوثيقة ISO 18758:2026

الإنجليزية 77 صفحات
الإصدار الحالي
BHD 91.32

مجال الوثيقة ISO 18758:2026

This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations:

  1. blast hole drilling;
  2. rock reinforcement and consolidation (injection holes, pipe roofing, netting, bolting);
  3. drilling for secondary breaking;
  4. dimensional stone drilling;
  5. mineral prospecting, e.g. utilizing core drilling or reverse circulation drilling;
  6. water and methane drainage drilling;
  7. raise boring;

when used by a well-trained operator in accordance with the information for use and where sufficient measures have been taken to prevent unauthorized entry of persons to the area where machines are working.

NOTE            Machines can be designed for more than one of the operations above. See ISO 22932-4 and ISO 22932-5 for vocabulary.

This document is not applicable to the following machines: drill rigs for soil and rock mixture, Kelly drill rigs and casing drivers, cable tool drill rigs, pre-armouring machines, sonic drill rigs, shaft sinking drill rigs, crane attached drill rigs, drill rigs on derricks, scaling machines.

This document deals with the relevant and significant hazards, hazardous situations, or hazardous events, as listed in Annex C, when the machine is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.

This document is not applicable to machines manufactured before the date of its publication.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013 
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
BH GSO 9:2023
GSO 9:2022 
لائحة فنية بحرينية
بطاقات المواد الغذائية المعبأة
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة

اعتمدت مؤخراً

ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C